Routing; Additional Routing Protocols; Iisp Routes - Cabletron Systems SmartSwitch 6500 User Manual

5 ROUTING

5.1

ADDITIONAL ROUTING PROTOCOLS

Along with PNNI, the SmartSwitch 6500 supports additional ATM routing protocols:
•
IISP — Use to connect with devices that do not support PNNI
•
UNI — Use to connect end stations (also to connect devices whose implementation of ILMI is
incompatible with the SmartSwitch 6500)
Both IISP and UNI routes are created and modified using the
Note
The proper route type is determined by the SmartSwitch 6500 through interface
signaling information.
5.2

IISP ROUTES

Use the command to create an IISP route that links the SmartSwitch 6500 to a device that supports only
add atmroute
IISP routing. For example,
1. Physically connect port
2. Enter
show netprefix
Smart6500 # show netprefix 5b2
Port NetPrefix
==============================================================================
5B2 39:00:00:00:00:00:00:00:00:00:14:41:80
Smart6500 #
Determine the address of the IISP device. (For this example, this could be a port address, we use
3.
52:00:00:00:00:00:00:00:00:00:14:51:80)
Enter the
4.
add atmroute
Smart6500 # add atmroute
PortNumber() : 5b2
AtmAddress() : 52:00:00:00:00:00:00:00:00:00:14:51:80
PrefixLength(104) :
Index(0) :
Type(Internal) :exterior
Scope(0) :
MetricsTag(0) :
Smart6500 #
of the SmartSwitch 6500 to the IISP device.
5b2
to determine the netprefix of port
command to create a static route to the IISP device:
< This is an exterior route
ATMRoute
on the SmartSwitch 6500:
5b2
SmartSwitch 6500 User Guide 5-1
command.