Console Help - Cabletron Systems SmartSwitch 6500 User Manual

Using the Console
Selecting number three from the list automatically enters the corresponding command; pressing enter executes the
command:
PNNI Node Information
================================================================================
Level : 80
Node Id : 50:a0:39:00:00:00:00:00:00:00:00:00:28:c1:80:00:20:d4:28:c1:80:00
Lowest : TRUE
Admin Status : UP
Oper Status : UP
Atm Address : 39:00:00:00:00:00:00:00:00:00:28:c1:80:00:20:d4:28:c1:80:00
Peer Group Id: 50:39:00:00:00:00:00:00:00:00:00:00:00:00
Rst Transit : FALSE
Rst Branching: FALSE
DB Overload : FALSE
Ptse : 2
Smart6500 #
2.5.6

Console Help

The console provides several levels of help for console commands. For example, to list the switch attributes that can
be used with a particular operator, enter the word
Smart6500 # help add
HELP ---- add
==============================================================================
add [ AlarmConfig | Alias | ATMRoute | BUSELAN | Community | ELAN |
Interface | IPATMClient | IPATMPVC | LANEClient | LECSELAN |
LECSELANLEC | LECSTLVSET | LESELAN | NetPrefix | PnniMetrics |
PnniSummaryAddress | PVC | Route | ServiceRegistry |
TrafficDescriptor | TrapCommunity ]
Smart6500 #
To obtain an explanation of a command and its parameters, enter the word
Smart6500 # ? add laneclient
Create LANE Client
============================================================================
ClientNumber
LanName
ServerType
ServerAddress
IPAddress
NetMask
MTU
Smart6500 #
While entering a command, you can obtain help about the current parameter by entering a question mark (
prompt. For example:
Smart6500 # add atmroute
PortNumber(A1)
AtmAddress()
PrefixLength(104)
Index(0)
Type(Internal)
The type of reachability. Use Internal, Exterior, or Reject.
Type(Internal)
Scope(0)
MetricsTag(0)
Smart6500 #
2-24 SmartSwitch 6500 User Guide
(or
help
Local Client Number (0-127)
Name of the ELAN to join
Type of LANE Server [LECS, LES]
ATM Address of the LANE Server
IP Address of the Client
IP Netmask of the Client
MTU for the Client [1516, 9234, NONE]
: a3
: 39:00:00:00:00:00:00:00:00:00:14:72:80
:
:
: ?
:exterior
:
:
) followed by the operator.
?
(or
help ?
< What does type mean?
Switch Installation and Setup
) before the command.
) at the
?