Default Community Strings - Cabletron Systems SmartSwitch 6500 User Manual

Managing the SmartSwitch 6500
•
TrapCommunity: Specifies the NMS to which traps are sent
•
MyNMAddr: Specifies the IP address through which the switch is managed
•
TrustedNMS:Specifies the IP address of the NMS allowed to perform the following commands:
-
update firmware
-
backup
-
restore
-
reboot
B.2.2

Default Community Strings

The following is a list of the default community strings used by the SmartSwitch 6500:
•
public — Used for all standard SNMP communication
•
ILMI — Used by ILMI channels between switches
•
zeitnet — Used by the SmartSwitch ATM Administrator program
If the community string zeitnet is changed on the SmartSwitch 6500 it must also
Caution
be changed at the SmartSwitch ATM Administrator. Failure to do so, makes the
SmartSwitch 6500 unreachable by the SmartSwitch ATM Administrator
program.
B-8 SmartSwitch 6500 User Guide
Agent Support