Enable Mode - Cabletron Systems SmartSwitch Router User's Reference Manual

multicast
ping
pvst
sfs
statistics
stp
telnet
traceroute
vlan

Enable Mode

Enable mode provides more facilities than User mode. You can display critical features
within Enable mode including router configuration, access control lists, and SNMP
statistics. To enter Enable mode, enter the enable command, then supply the password
when prompted.
To list the Enable commands, enter:
List the Enable commands.
The Enable mode command prompt consists of the SSR name followed by the pound
sign(#):
ssr#
To list the commands available in Enable mode, enter a question mark (?) as shown in the
following example:
ssr# ?
acl
aging
arp
bgp
cli
configure
copy
dhcp
dvmrp
enable
exit
file
filters
frame-relay
help
http
igmp
interface
SmartSwitch Router User Reference Manual
- Configure Multicast related parameters
- Ping utility
- Show Per Vlan Spanning Tree Protocol (PVST)
parameters
- Show SecureFast Switching (SFS) parameters
- Show or clear SSR statistics
- Show STP status
- Telnet utility
- Traceroute utility
- Show VLAN-related parameters
?
- Show L3 Access Control List
- Show L2 and L3 Aging information
- Show or modify ARP entries
- Show Border Gateway Protocol (BGP) parameters
- Modify the command line interface behavior
- Enter Configuration Mode
- Copy configuration database
- Configure DHCP server
- Show DVMRP related parameters
- Enable privileged user mode
- Exit current mode
- File manipulation commands
- Show L2 security filters
- Display Frame Relay statistics
- Describe online help facility
- Show http parameters
- Show IGMP related parameters
- Show interface related parameters
Chapter 1: SSR Product Overview
35