Setting An Ip Qos Policy; Specifying Precedence For An Ip Qos Policy; Configuring Ipx Qos Policies; Setting An Ipx Qos Policy - Cabletron Systems SmartSwitch Router User's Reference Manual

Setting an IP QoS Policy

To set a QoS policy on an IP traffic flow, enter the following command in Configure mode:
Set an IP QoS policy.
For example, the following command assigns control priority to any traffic coming from
the 10.10.11.0 network:
ssr(config)# qos set ip xyz control 10.10.11.0/24

Specifying Precedence for an IP QoS Policy

To specify the precedence for an IP QoS policy, enter the following command in Configure
mode:
Specify precedence for an
IP QoS policy.

Configuring IPX QoS Policies

To configure an IPX QoS policy, perform the following tasks:
1. Identify the Layer-3 or 4 flow, and set the IPX QoS policy.
2. Specify the precedence for the fields within an IPX flow.

Setting an IPX QoS Policy

To set a QoS policy on an IPX traffic flow, enter the following command in Configure
mode:
Set an IPX QoS policy.
SmartSwitch Router User Reference Manual
<name> <priority> <srcaddr/mask>
qos set ip
<dstaddr/mask>
|any
<tos> <port list>
|any
<protocol> <tos-mask>|
|any
rewrite>| <tos-rewrite>|
any
qos precedence ip [sip
[srcport
<num>
[tos
<num>
]
<name> <priority> <srcnet>
qos set ipx
<srcmask>
|any
<dstmask>
|any
list>
|any
Chapter 19: QoS Configuration Guide
<srcport> <dstport>
|any
<interface-list>
| |any
<tos-precedence-
any
any
<num>
] [dip
<num> <num>
] [destport
<num>
] [protocol
<srcport> <dstnet>
|any
<dstport> <port list>
|any
|any
|any
<num>
]
]
] [intf
|any
|any
<interface-
|
287