Multi-Router Wan Configuration - Cabletron Systems SmartSwitch Router User's Reference Manual

Multi-Router WAN Configuration

The following is a diagram of a multi-router WAN configuration encompassing three
subnets. From the diagram, you can see that R1 is part of both Subnets 1 and 2; R2 is part
of both Subnets 2 and 3; and R3 is part of subnets 1 and 3. You can click on the router label
(in blue) to jump to the actual text configuration file for that router:
PPP wan-encaps.
SmartBits
30.30.30.13
IP packets
100.100.100.1
Frame Relay
wan-encaps.
subnet S1
VC = 106
100.100.100.6
100.100.100.6 et.15.2
100.100.100.100
Video
Server
Win NT
SmartSwitch Router User Reference Manual
100.100.100.5
subnet S1
100.100.100.4
100.100.100.4
100.100.100.3
et.1.1
30.30.30.3
100.100.100.3 hs.4.1
100.100.100.1
hs.3.1
hs.3.2
R1
120.120.120.1
hs.7.1
PPP wan-encaps.
subnet S2
hs.3.1
R6
et.15.1 60.60.60.6
60.60.60.16
SmartBits
IP packets
Figure 24. Multi-router WAN configuration
Chapter 22: WAN Configuration Guide
R5 et.1.1 50.50.50.15
50.50.50.5
se.4.1
se.6.3
R4
se.6.1
Frame Relay
wan-encaps.
subnet S1
VC = 304
se.2.1
R3
hs.4.2 130.130.130.3
Frame Relay
wan-encaps.
hs.7.2
subnet S1
VC = 103
hs.7.1
120.120.120.2
20.20.20.2
20.20.20.12
SmartBits
IP
generator
Legend:
SmartBits
IP packet
generator
PPP wan-encaps.
subnet S3
130.130.130.2
R2
et.1.1 et.1.2 200.200.200.1
200.200.200.200
Video
Client
Win 95
Router Connections on Subnet 1
Router Connections on Subnet 2
Router Connections on Subnet 3
333