Enable Mode - Cabletron Systems SmartSwitch 8-slot User's Reference Manual

Chapter 1: SmartSwitch Router Product Overview
l2-tables
logout
multicast
ping
statistics
stp
traceroute
vlan

Enable Mode

Enable mode provides more facilities than User mode. You can display critical features
within Enable mode including router configuration, access control lists and SNMP
statistics. To enter Enable mode, enter the
password when prompted.
To list the Enable commands, enter:
List the user Enable commands.
The Enable mode command prompt consists of the SSR name followed by the pound
sign(#):
ssr#
To list the commands available in Enable mode, enter a question mark (?) as shown in
the following example:
ssr# ?
1 - 6
- Show L2 Tables information
- Log off the system
- Configure Multicast related parameters
- Ping utility
- Show or clear SSR statistics
- Show STP status
- Traceroute utility
- Show VLAN-related parameters
?
acl
aging
arp
cli
configure
copy
dvmrp
enable
exit
file
filters
http
igmp
interface
ip
ip-router
command, then supply the
enable
- Show L3 Access Control List
- Show L2 and L3 Aging information
- Show or modify ARP entries
- Modify the command line interface
behavior
- Enter Configuration Mode
- Copy configuration database
- Show DVMRP related parameters
- Enable privileged user mode
- Exit current mode
- File manipulation commands
- Show L2 security filters
- Show http parameters
- Show IGMP related parameters
- Show interface related parameters
- Show IP related parameters
- Show unicast IP Routing related
parameters
SSR User Reference Manual