Redistributing Rip Into Rip; Redistributing Rip Into Ospf; Redistributing Ospf To Rip; Redistributing Aggregate Routes - Cabletron Systems SmartSwitch Router User's Reference Manual

Redistributing RIP into RIP

The SSR routing process requires RIP redistribution into RIP if a protocol is redistributed
into RIP.
To redistribute RIP into RIP, enter the following command in Configure mode:
To redistribute RIP into RIP.

Redistributing RIP into OSPF

RIP routes may be redistributed to OSPF.
To redistribute RIP into OSPF, enter the following command in Configure mode:
To redistribute RIP into OSPF.

Redistributing OSPF to RIP

For the purposes of route redistribution and import-export policies, OSPF intra- and inter-
area routes are referred to as ospf routes, and external routes redistributed into OSPF are
referred to as ospf-ase routes. Examples of ospf-ase routes include static routes, rip
routes, direct routes, bgp routes, or aggregate routes, which are redistributed into an
OSPF domain.
OSPF routes may be redistributed into RIP. To redistribute OSPF into RIP, enter the
following command in Configure mode:
To redistribute ospf-ase
routes into rip.
To redistribute ospf routes
into rip.

Redistributing Aggregate Routes

The aggregate parameter causes an aggregate route with the specified IP address and
subnet mask to be redistributed.
Note: The aggregate route must first be created using the aggr-gen command. This
command creates a specified aggregate route for routes that match the aggregate.
SmartSwitch Router User Reference Manual
Chapter 11: Routing Policy Configuration Guide
ip-router policy redistribute from-proto rip
to-proto rip
ip-router policy redistribute from-proto rip
to-proto ospf
ip-router policy redistribute from-proto
ospf-ase to-proto rip
ip-router policy redistribute from-proto
ospf to-proto rip
173