Cabletron Systems SmartSwitch Router User's Reference Manual page 48

Chapter 1: SSR Product Overview
Show SSR location.
Show the SSR login banner.
Show SSR name.
Show the type of Power-On Self Test (POST)
that should be performed.
Show the configuration changes in the
scratchpad. These changes have not yet been
activated.
Show the startup configuration for the next
reboot.
Show the status of the switching fabric
module.
Show the IP address of the SYSLOG server
and the level of messages the SSR sends to the
server.
Lists the last five Telnet connections to the
SSR.
Show the default terminal settings (number of
rows, number of columns, and baud rate.
Show the time zone offset from UCT in
minutes.
Show SSR uptime.
Show the current Telnet connections to the
SSR.
Show the software version running on the
SSR.
48
Task Command
system show location
system show login-banner
system show name
system show poweron-selftest-
mode
system show scratchpad
system show startup-config
system show switching-fabric
system show syslog
system show telnet-access
system show terminal
system show timezone
system show uptime
system show users
system show version
SmartSwitch Router User Reference Manual