Komatsu D37EX-24 Operation & Maintenance Manual page 85

OPERATION EXPLANATION OF COMPONENTS
OPERATING MODE DISPLAY
The currently set operating mode is displayed on the operating
mode display.
The display of the operating mode is as follows.
(P): For heavy-duty operations
Lights up when the mode is set to power mode.
(E): For operations with emphasis on fuel consumption
Lights up when the mode is set to economy mode.
The operating mode changes each time the operating mode
selector switch is pressed.
ENGINE STOP PILOT LAMP
The engine stop pilot lamp is displayed while the engine is
stopped. It goes out when the engine is started.
AFTERTREATMENT DEVICES REGENERATION DISPLAY
This displays the regeneration status and automatic regenera-
tion setting status of the aftertreatment devices.
(A): Comes on during regeneration.
(B): Comes on when setting automatic regeneration disable.
WORK EQUIPMENT LOCK PILOT LAMP
The work equipment lock pilot lamp lights up when the work
equipment lock lever is in LOCK position.
It goes out when the work equipment lock lever is set in FREE
position.
If it is required to set the work equipment lock lever in LOCK
position, the work equipment lock pilot lamp flashes.
3-27