Komatsu D37EX-24 Operation & Maintenance Manual page 189

OPERATION
• If it is difficult to see the sight gauge due to dirt, etc., re-
move mounting bolts (B)(5 pieces), remove cover (A), and
wipe off dirt on the surface of the sight gauge.
METHOD FOR ADDING DEF FROM BIB CONTAINER
• When opening or closing the DEF tank filler port cover, place the machine on a level ground, lower
the work equipment to the ground, stop the engine, and then perform the operation.
• When opening the bracket, do not release the bracket until it opens to be horizontal.
• Open the bracket and put the BIB container onto it.
• Do not put the BIB container whose capacity exceeds 10 ℓ onto the opened bracket.
• Do not put your foot and hand on or lean on the opened bracket.
• The BIB container of 10 ℓ weighs 11 kg.
Before putting the BIB container on the DEF tank filler port cover, put it on the track first. After that,
move the BIB container onto the opened bracket.
Prepare a BIB container of 10 ℓ.
1.
Place the machine on a level ground and lower the work equipment to the ground.
If the machine is inclining, make it level.
2.
Stop the engine.
3.
Put the BIB container on the track first.
4.
Open the DEF tank filler port cover (1).
For the opening and closing method of the cover, see
"METHOD FOR OPENING AND CLOSING DEF TANK
FILLER PORT COVER (3-185)".
5.
Remove the fixing band (2).
MACHINE OPERATIONS AND CONTROLS
k k
CAUTION
3-131