Table of Contents
Advertisement
PERIODIC REPLACEMENT OF DEFINED LIFE PARTS
PERIODIC REPLACEMENT OF DEFINED LIFE PARTS
For using the machine safely for an extended period of time, you must periodically replace the safety critical and
fire prevention-related parts listed in the table of the defined life parts.
Material quality of these parts can change as time passes and they are likely to wear out or deteriorate. Howev-
er, it is difficult to determine the extent of wear or deterioration at the time of periodic maintenance. Hence, it is
required to replace them with new ones regardless of their condition after a certain period of usage. This is im-
portant to ensure that these parts maintain their full performance at all times.
Furthermore, should anything abnormal be found on any of these parts, replace it with a new one even if the
periodic replacement time for the part has not yet arrived.
If any of the hose clamps show deterioration like deformation or cracking, replace the clamps at the same time
as the hoses.
Also perform the following checks with hydraulic hoses which need not to be replaced periodically. Tighten all
loose hoses and replace defective hoses, as required.
When replacing hoses, always replace O-rings, gaskets, and other such parts at the same time.
Have your Komatsu distributor replace the defined life parts.
DEFINED LIFE PARTS LIST
No.
1
Fuel system
2
Engine lubrication
system
3
Steering system
4
Brake system
5
Torque converter,
transmission system
(including HST)
6
Work equipment hy-
draulic system
7
Others
7-2
Periodical replacement parts
Fuel hose
Engine oil filter hose
High pressure circuit hose
Brake oil pressure hose
Transmission circuit hose (including HST)
Work equipment pump delivery hose
Work equipment pump LS hose
Hose for hydraulic drive fan
External work equipment hose
Blade lift hose
•
Blade tilt hose
•
Blade angle hose
•
Ripper lift hose
•
PPC accumulator
Seat belt
REPLACEMENT PARTS
Replacement interval
Every 2 years or 4000 hours, which-
ever comes sooner
Every 3 years from start of usage or
5 years after manufacturing of seat
belt, whichever comes sooner.
Advertisement
Chapters
Table of Contents
