OPERATION
It can be installed at the rear part of the operator's seat.
For details of the parts necessary for installation, consult your
Komatsu distributor.
BATTERY DISCONNECT SWITCH
•
Do not operate the battery disconnect switch while the engine is running.
The large current generated by the alternator may burn the electric parts and cause a fire.
Operate the battery disconnect switch only when the engine is stopped.
•
If the battery disconnect switch is turned to OFF position, always remove the switch key.
If someone turns the key to ON position carelessly, this is extremely dangerous.
NOTICE
•
Keep the battery disconnect switch in ON position except the following cases.
•
When the machine is stored for a long time (more than a month)
•
When repairing the electrical system
•
When performing electric welding
•
When handling the battery
•
When replacing the fuse, etc.
•
Do not turn the battery disconnect switch to OFF position while the system operating lamp is lit. If
the battery disconnect switch is turned to OFF position while the system operating lamp is lit, the
data in the controller may be lost.
•
If this switch is turned to OFF position, all the electrical system is cut out and the functions of KOM-
TRAX stop. In addition, the time information of the clock and the radio tuning information may be
lost. In this case, set the information again by referring to "CLOCK ADJUSTMENT" and "HANDLE
RADIO".
k
k
CAUTION
EXPLANATION OF COMPONENTS
3-99