Komatsu D37EX-24 Operation & Maintenance Manual page 146

EXPLANATION OF COMPONENTS
Tilting operation
(E) LEFT tilt
Blade tilts leftward.
(B) HOLD
Blade is stopped and held in this position.
(F) RIGHT tilt
Blade tilts rightward.
Machine
model
Narrow blade
D37EX
D37PX
Angling operation
Operate angle switch (L) forward and backward to angle the
blade.
(G) LEFT angle
Blade is angled leftward.
(B) HOLD
Blade is stopped and held in this position.
(H) RIGHT angle
Blade is angled rightward.
REMARK
• If the angling operation is performed while the blade con-
trol lever is not in HOLD position (while one or both of lift-
ing and tilting operations are performed), all of those oper-
ations can be continued, but the moving speed of the
blade is lowered.
Select the operations according to the contents of work.
• If the lifting or tilting operation is performed while angling
operation is performed, the machine moves similarly to the
above.
3-88
Tilting amount ( mm)
Width blade
–
390
370
435
OPERATION