Table of Contents
Advertisement
TROUBLES AND ACTIONS
6.
Remove the bolt (7) (1 piece) and remove the clip.
7.
Loosen the nuts of terminal (8) (2 places) and disconnect
the cable from the battery.
Disconnect the ground cable (normally connected to the
negative (-) terminal) first.
If any tool touches the positive terminal of the battery and
the chassis, there is a danger that it will cause a spark.
8.
Remove the nuts (10) and (11) (2 places each) of the bat-
tery mounting fixture (9), and remove the rods (12) (2 pla-
ces).
The nuts (10) and (11) of the battery mounting fixture and
rods (12) (1 place each) are provided inside the DEF tank
filler port cover.
9.
Remove the bolts (13) (3 pieces), and remove the bracket
(14).
10. Take out the battery (15).
When taking out the battery, move it toward the rear of the
machine.
3-210
OPERATION
Advertisement
Chapters
Table of Contents
