Komatsu D37EX-24 Operation & Maintenance Manual page 260

TRANSPORTATION
2.
Set the work equipment lock lever securely to LOCK posi-
tion (L).
3.
Stop the engine, and remove the key from the starting
switch.
4.
Securely lock the glass window, cab door, engine side cov-
er, hydraulic tank inspection cover, DEF tank filler port cov-
er, and fuel tank inspection cover.
5.
Select the lifting tool such as wire ropes and slings match-
ing to the weight of the machine, and fit the wire ropes to
the slinging position.
(A) Mark indicating slinging position
NOTICE
• Use protectors, etc. so that the wire ropes will not
be broken at sharp edges or narrow places.
• When using a spreader beam, select an ample
width to prevent contact with the machine.
6.
Just before slinging the machine, lift it off the ground by
100 to 200 mm while it is being set.
7.
Check that the wire ropes are free of looseness and the
machine is kept on a level state.
8.
Sling the machine slowly.
3-202
OPERATION