Table of Contents
Advertisement
TROUBLES AND ACTIONS
•
If the machine gets stuck in the mud or a heavy thing
needs to be towed, install a towing wire rope to the draw
bar pin.
Connect a wire rope to the part indicated with the arrow in
the drawing.
PRECAUTIONS FOR DISCHARGED BATTERY
k
k
•
It is dangerous to charge a battery when installed on a
machine. Make sure that it is removed before charg-
ing.
•
When checking or handling the battery, stop the en-
gine and turn the starting switch and battery discon-
nect switch keys to OFF positions.
•
The battery generates hydrogen gas, and it is danger-
ous that it may explode. Do not bring lighted ciga-
rettes near the battery, or do nothing that will cause
sparks.
•
Battery electrolyte is dilute sulfuric acid, and it will at-
tack your clothes and skin. If it gets on your clothes or
on your skin, immediately wash it off with a large
amount of clean water.
If it gets in your eyes, wash the eyes immediately with
clean water, then consult a doctor for medical treat-
ment.
•
When handling batteries, always wear protective eye-
glasses and rubber gloves.
•
When removing the battery, first disconnect the cable
from the ground (normally the negative (-) terminal).
When installing, first connect the cable to the positive
(+) terminal.
If a tool touches the positive terminal and the chassis,
it is dangerous that it may cause a spark. Be extremely
careful.
•
If the terminals are loose, it is dangerous that the de-
fective contact may generate sparks, and it may cause
an explosion.
Install the cable terminals securely.
•
When removing or installing the cable terminals,
check which is the positive (+) terminal and which is
the negative (-) terminal.
3-208
WARNING
OPERATION
Advertisement
Chapters
Table of Contents
