Komatsu D37EX-24 Operation & Maintenance Manual page 12

INTRODUCTION
To assist with job site organisation during use of this machine, a visibility map is provided that shows an approxi-
mation of any masking to visibility between the 1 m rectangular boundary and the 12 m test circle.
Based upon the information supplied in the visibility map the site operator may wish to provide additional meas-
ures where it is felt necessary or provide additional instruction to personnel.
Specification of visibility map
• Machine Posture : In accordance with ISO5006
• Evaluation height : 1.2 m above the ground
• Scale-interval of the circles is 1 m.
1-10
FOREWORD