Table of Contents
Advertisement
SAFETY
(10) Caution for approaching while moving machine (09806-
B0883)
•
Sign indicates a hazard of being run over by moving equip-
ment.
•
Keep a safe distance from equipment when it is moving.
(11) Prohibition of start by short-circuiting (09842-A0481)
•
Start the engine only after sitting down in the operator's
seat.
•
Do not attempt to start the engine by short-circuiting the
engine starting circuit. Such an act may cause a serious
bodily injury or fire.
(12) Caution for handling ROPS/FOPS (09620-A3001, 09620-
A2001)
ROPS/FOPS CERTIFCATION
This protective structure complies with the standard provided
that it is properly equipped on the machine which mass is less
than the specified maximum mass.
•
If any modification is applied to the ROPS or FOPS, it may
effect the strength and may not comply with the standard.
Do not drill, cut or weld on the ROPS or FOPS structure. Any modification is prohibited.
•
ROPS or FOPS may provide less protection if it has been structurally damaged or involved roll-over. Con-
sult Komatsu Distributor in that case.
•
Always wear seat belt when moving.
(13) Caution for blast site (09845-00480)
(only machine with KOMTRAX)
•
Sign indicates an explosion hazard caused by active radio
transmitter at a blast zone.
•
Keep machine at a safe distance from a blast zone and
detonator.
SAFETY LABELS
2-9
Advertisement
Chapters
Table of Contents
