Komatsu D37EX-24 Operation & Maintenance Manual page 103

OPERATION
4.
Check the setting of each item (on the left of the screen).
5.
Press the switch F3 or F4 to move the yellow cursor to a
memory number ("M1" to "M5") to save, and press the
switch F6.
The setting is saved by the above operation.
METHOD FOR CALLING MEMORY
1.
Press switch F1 on "Mode Select" screen.
The mode memory call screen is displayed.
2.
Press switch F3 or F4 to move the yellow cursor to a mem-
ory number ("M1" to "M5") to call out.
As the cursor is set to the number, the setting stored in the
memory is displayed in the right side of the screen.
3.
Call out the selected setting by pressing switch F6.
CAMERA IMAGE SELECTOR SWITCH
On the standard screen, press switch F3 to switch to the cam-
era image display.
Press switch F3 while camera image is displayed, and the
screen returns to the standard screen.
EXPLANATION OF COMPONENTS
3-45