Komatsu D37EX-24 Operation & Maintenance Manual page 102

EXPLANATION OF COMPONENTS
3RD TRAVEL SPEED SETTING
Select "3rd Travel Speed Setting" on "Mode Select" screen,
and press switch F6.
3rd travel speed in quick shift mode can be selected out of 3
levels according to the operation.
You can increase or decrease the speed in 1 level each.
0: Increases 1 level from preset 3rd travel speed
-1: Preset 3rd travel speed
-2: Decreases 1 level from preset 3rd travel speed
For details of the travel speed setting method, see "1ST TRAV-
EL SPEED SETTING".
METHOD FOR SETTING EACH ITEM AND SAVING MEMORY
1.
Press the switch F3 or F4 on "Mode Select" screen to set
the yellow cursor to the target item of setting change, and
then press the switch F6.
The setting change screen for the selected item is dis-
played.
2.
Press the switch F3 or F4 to move the yellow cursor to a
setting to change, and press the switch F6.
(The figure shows an example of the setting change
screen when "Operating Mode" is selected.)
3.
After the setting change of each item is completed, press
the switch F2.
The memory saving screen is displayed.
3-44
OPERATION