Table of Contents
Advertisement
OPERATION
REMARK
•
If the light switch is at night mode ON, and the screen is adjusted, it is possible to adjust the brightness of
the monitor screen (night mode).
•
If the light switch is at day mode ON, and the screen is adjusted, it is possible to adjust the brightness of the
monitor screen (day mode).
•
As long as "*" mark is displayed in the upper right corner of the screen, brightness is automatically restrict-
ed by the machine monitor to protect the liquid crystal. Screen adjustment may not change the screen
brightness as long as "*" mark is displayed. However, it is not an error.
SET GUIDE LINE DISPLAY MODE
1.
Select "Guide Line Display Mode" on "Screen Adjustment
(Camera)" menu.
2.
Press switch F6.
3.
"Guide Line Display Mode" setting screen is displayed.
•
"OFF": Guide lines (Outline (A), Center Line (B)) are
not displayed.
•
"Outline": Only outlines (A) that indicate the machine
width and the distance from the rear end of the ma-
chine are displayed.
•
"Center Line": Only machine center line (B) is dis-
played.
•
"All": Both of Outline (A) and Center Line (B) are dis-
played.
On this screen, it is possible to perform the following operations
with switches F3 to F6.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When on the
first line, it moves to the last line.
F5: Cancels the setting and returns to the "Screen Adjustment
(Camera)" screen.
F6: Change the setting and returns to the "Screen Adjustment
(Camera)" screen.
CLOCK ADJUSTMENT
"Clock Adjustment" menu is used to change the setting of the clock displayed on the standard screen of the
monitor.
EXPLANATION OF COMPONENTS
3-71
Advertisement
Chapters
Table of Contents
