MACHINE OPERATIONS AND CONTROLS
8.
Make the machine move off by releasing decelerator/brake
pedal (2) gradually.
REMARK
When moving off, the machine sometimes deviates a little,
but this is due to actuation of straight-travel correction
mechanism and it is not a failure.
METHOD FOR STOPPING MACHINE
k
k
•
Avoid a sudden stop. Stop the machine gradually.
•
Do not park the machine on a slope.
If it is unavoidably necessary to park the machine on a
slope, place parking brake lever (1) in LOCK position
and insert blocks underneath the track shoes to pre-
vent the machine from moving. As an additional safety
measure, thrust the work equipment into the ground.
•
If the blade control lever is touched by accident, the
blade may suddenly move, and this may lead to a seri-
ous accident. Set the work equipment lock lever (2) to
LOCK position always before leaving the operator's
seat.
1.
Depress the decelerator/brake pedal (3).
2.
Return the joystick (steering, directional and gear shift lev-
er) (4) back to NEUTRAL position (N).
The machine stops.
3-162
WARNING
OPERATION