Komatsu PC88MR-10 Shop Manual page 469

KOMTRAX Settings screen (Modem
Status)
(PC220-Q210-110-K-02-A)
The setting and operating conditions of KOMTRAX
can be checked on the display of KOMTRAX
Settings.
Modem information is used to check the IP address
of the KOMTRAX communication modem.
1. Selecting a menu
Select "KOMTRAX Settings" on "Service Menu"
screen.
2. Selecting a sub menu
After the "KOMTRAX Settings" screen is
displayed, select "Modem Status" by using the
function switch or numeral input switches.
a Selecting method is the same as on the
"Service Menu" screen.
3. Details displayed on Modem Status screen
PC88MR-10
30 Testing and adjusting
IP addresses (2 systems) of the modem are
displayed.
[F5]: Returns the screen to "KOMTRAX
Settings" screen
a IP address is a unique number assigned to
each modem that is used when
communication between the modem and
server is established.
Service Message
(PC220-Q210-100-K-00-A)
Special messages for the technician sent from
KOMTRAX base station (a distributor, etc.) can be
checked with this function.
If a received message includes a setting operation,
a return mail can be sent by using the numeral input
switches as well.
1. Selecting a menu
Select "Service Message" on "Service Menu"
screen.
2. Displaying message (read only)
If there is a message, the contents are displayed.
If there is no message, "No message." is
displayed.
[F5]: Returns to "Service Menu" screen
a This message is different from that sent to
the operator in the operator mode.
a Since this message is special for the
technician, the message monitor is not
displayed when it is received with the
machine monitor in the operator mode.
Electrical system
30-119