Komatsu PC88MR-10 Shop Manual page 458

30 Testing and adjusting
Electrical system
2. Selecting a sub menu
After the "Default" screen is displayed, select
"Key-on Mode" by using the function switch or
numeral input switches.
a Selecting method is the same as on the
"Service Menu" screen.
3. Selecting mode
After the "Key-on Mode" screen is displayed,
select the mode by using the function switches
to set it.
Power mode: [P] is displayed when the
starting switch is set to ON position
Economy mode: [E] is displayed when the
starting switch is set to ON position
Lifting Operation Mode: [L] is displayed when
the starting switch is turned to ON position.
Breaker Mode: [B] is displayed when the
starting switch is turned to ON position.
Attachment/P-mode: [ATT/P] is displayed
when the starting switch is set to ON
position.
Attachment/E-mode: [ATT/E] is displayed
when the starting switch is set to ON
position.
Mode at Previous Key-off: Final mode in
previous operation is displayed when the
starting switch is turned to ON position.
[F3]: Moves selection downward
[F4]: Moves selection upward
[F5]: Cancels selection and returns the
display to Default screen
30-108
[F6]: Enters selection and returns the display
to Default screen
a Factory default is, "Mode at Previous Key-
off".
a If "With Attachment" is not selected, selection
of the Attachment/P-Mode and Attachment/
E-mode is disabled.
a If you change the setting to "Without
attachment" when Attachment/P-mode [P] or
Attachment/E-mode is selected, Power
mode [P] is displayed when the starting
switch is turned to ON position.
Default value setting (Unit)
Use the menu of "Default" to check or change
various settings of the machine monitor and
machine.
The unit selecting function is used to select the unit
of the data to be displayed in monitoring, etc.
1. Selecting menu
Select "Default" on the "Service Menu" screen.
2. Selecting a sub menu
After the "Default" screen is displayed, select
"Unit" by using the function switch or numeral
input switches.
a Selecting method is the same as on the
"Service Menu" screen.
(PC88MR-Q1F3-100-K-00-A)
PC88MR-10