Komatsu PC88MR-10 Shop Manual page 445

a The unit of display can be selected in SI unit,
metric unit, or inch unit with the Default
function in the service mode.
5. Holding monitoring information
You can hold and release holding of the
monitoring information by using the function
switches.
[F4]: Selects hold or releasing hold
(If the Hold is selected, a diagonal line is
drawn on the HOLD portion.)
[F5]: Returns the display to monitoring
selection menu screen
6. Changing machine setting mode
To change the setting of the working mode,
travel speed, or
monitoring, operate the corresponding switch
under the current
corresponding mode is selected.
a If the setting is changed during monitoring,
the new setting is held even after the screen
returns to the ordinary screen after
monitoring is finished.
PC88MR-10
auto-deceleration during
condition, and the
30 Testing and adjusting
7. Saving of monitoring item
A function switch lets you save and delete the
selected monitoring item.
[F1]: MEMORY
[F2]: CLEAR
a When a monitoring item is saved, a
confirmation screen appears asking whether
the saved item should be displayed or not,
when "Monitoring" is selected again.
a When an item is saved, it can be displayed
as many times as required unless it is
cleared.
a If another item is saved while having the
previous item saved, the previously saved
item is overwritten by the latest one.
a The saved monitoring item is cleared by
using [F2]. It is also cleared when the
selection is entered by using [F6] in the
following screen.
KOMTRAX terminal screen
"With/Without Attachment" screen
Functional specification screen
Air conditioner setting screen
Electrical system
30-95