Komatsu PC88MR-10 Shop Manual page 434

30 Testing and adjusting
Electrical system
Setting and display of user mode (including
KOMTRAX messages for user)
K-00-A)
To enter and display the user mode, press [F6] to
display the "User Menu" screen while the standard
screen is displayed.
a There are following items in the user menu.
"Energy Saving Guidance"
"Machine Setting"
"Maintenance"
"Monitor Setting"
"Mail Checking"
[KOMTRAX message]
There are two types of KOMTRAX message;
one is for the user and the other is for the
technician.
For user:
It denotes the messages transmitted from the
KOMTRAX base
receiving a message, the message monitor is
displayed on the standard screen. Operate this
"Check mail" when viewing contents of a
message.
For technician:
It denotes the messages transmitted from the
KOMTRAX base station to technicians. Upon
receiving a message, nothing is displayed on the
standard screen. Operate "Service message
display" of the service mode when viewing
contents of a message.
30-84
(PC88MR-Q1C3-100-
station to users. Upon
Display of ECO guidance
When the machine remains in a certain operating
condition, the "ECO Guidance" screen is displayed
automatically to urge the operator to perform
energy-saving operation.
a The ECO Guidance screen is displayed when
the following conditions are met while this
display function is set to be enabled in operator
mode.
a Conditions for display:
Idle stop guidance
When no lever is operated for a period of at least
5 minutes and the engine keeps running at idle
during this period, the guidance on idle stop is
displayed on the monitor. This function helps
reduce unnecessary
alerting the operator to stop the engine while
waiting for the next operation, or during a break.
a The lamp for the idle stop guidance goes out
automatically when the lever operation is
resumed, or if the function switch [F5] is
pressed.
Deterrence guidance of hydraulic relief
If relieving lasts for 3 or more seconds during
operation, deterrence guidance of hydraulic
relief is displayed on the monitor.
a The lamp for the guidance on deterrence of
hydraulic relief goes out automatically after
10 seconds has passed since it appeared, or
if the function switch [F5] is pressed.
(PC88MR-Q1L3-100-K-00-A)
fuel consumption by
PC88MR-10