Komatsu PC88MR-10 Shop Manual page 461

Use the auto idle stop time fixing setting function to
set the time selectable by using the auto idle stop
time setting in the operator mode.
1. Selecting menu
Select "Default" on the"Service Menu" screen.
2. Selecting a sub menu
After the "Default" screen is displayed, select
"Auto Idle Stop Time Fixing" by using the
function switch or numeral input switches.
a Selecting method is the same as on the
"Service Menu" screen.
3. Setting selectable time
After the "Auto Idle Stop Time Fixing" screen is
displayed, select a setting by using the function
switch.
Variable: Selection from OFF to 60 minutes
is allowed.
OFF: Auto idle stop function is not used.
X-minute fixing: OFF setting and setting the
time longer than the selected time are
unselectable.
[F3]: Moves selection downward
[F4]: Moves selection upward
[F5] Cancels contents of setting before entry
and returns to "Default" screen
[F6]: Enters selection and returns the display
to Default screen
a When this setting is "OFF", the auto idle stop
does not operate. Accordingly, the auto idle
stop time setting in the operator mode is
disabled.
PC88MR-10
30 Testing and adjusting
Default (Auto Idle Stop Setting)
K-00-A)
Use the menu of "Default" to check or change
various settings of the machine monitor and
machine.
Use the auto idle stop setting function to set the
shortest time selectable by using the auto idle stop
time setting.
1. Selecting menu
Select "Default" on the "Service Menu" screen.
2. Selecting a sub menu
After the "Default" screen is displayed, input "50"
by using the numeral input switches and press
"F6".
a This function is required if the setup time
needs to be shorter than the initial setting "5
minutes" by laws and regulations or if the
auto idle stop setting by the specifications is
not allowed to operate. Accordingly, this
function is not displayed in the menu list.
This function allows you to set the time
shorter than the initial setting "5 minutes".
However, setting the shorter time may result
in lower durability of the starting motor due to
increase in frequency of engine start.
Electrical system
(PC88MR-Q1C9-110-
30-111