Table of Contents
Advertisement
Service mode functions
These functions are not displayed normally. A technician can display and set them special operation of
switches.
This function is used for special setting, testing, adjusting, or troubleshooting.
Items available in the service mode are as follows:
Pre-defined Monitoring
Self-define Monitoring
Abnormality Record
Maintenance Record
Maintenance Mode Setting
Phone Number Entry
Default
Diagnostic Tests
Adjustment
No-Injection
KOMTRAX Settings
Service Message
a For operating method of the service mode functions, see "Service mode" in Testing and adjusting.
PC88MR-10
(PC88MR-Q194-042-K-00-A)
Mechanical Sys Abnormality Record
Electrical Sys Abnormality Record
Key-on Mode
Unit
With/Without Attachment
Camera
Auto Idle Stop Timer Fixing
Cylinder Cutout Mode Operation
Reset Number of Abrupt Engine Stop by AIS
Pump Absorption Torque
Att Flow Adjust in Combined Ope
Attachment EPC2 Adjustent
Attachment EPC3 Adjustent
Attachment EPC4 Adjustent
Attachment EPC5 Adjustent
Terminal Status
GPS & Communication State
Modem Information
10 Structure and function
Machine monitor system
10-235
Advertisement
Chapters
Table of Contents
Troubleshooting
