Komatsu PC88MR-10 Shop Manual page 462

Hydraulic excavator
Hide thumbs Also See for PC88MR-10:
Table of Contents

Advertisement

30 Testing and adjusting
Electrical system
3. Setting selectable time
After the "Auto Idle Stop Setting" screen is
displayed, select a setting by using the function
switch.
OFF: Auto idle stop function is not used.
1 minute: When selection from "1-minute fix"
to "60-minute fix" is allowed or when
"Variable" is selected in "Auto Idle Stop
Setting", selection from "1 minute" to "60
minutes" is allowed in "Auto Idle Stop
Setting".
3 minutes: When selection from "3-minute
fix" to "60-minute fix" is allowed or when
"Variable" is selected in "Auto Idle Stop Time
Fixing", selection from "3 minutes" to "60
minutes" is allowed in "Auto Idle Stop
Setting".
""""5 minutes: When selection from "5-minute
fix" to "60-minute fix" is allowed or when
"Variable" is selected in "Auto Idle Stop Time
Fixing", selection from "5 minutes" to "60
minutes" is allowed in "Auto Idle Stop
Setting".
[F3]: Moves selection downward
[F4]: Moves selection upward
[F5] Cancels contents of setting before entry
and returns to "Default" screen
[F6]: Enters selection and returns the display
to Default screen
a When this setting is "OFF", the auto idle stop
does not operate. Accordingly, the auto idle
stop time setting in the operator mode and
the auto idle stop time fixing in the service
menu are disabled.
30-112
Testing (Cylinder Cut-out operation)
AD00-34F-K-00-A)
On the machine monitor, the cylinder cutout mode
operation can be performed.
Cylinder cutout mode operation means to run the
engine with one or more fuel injectors disabled
electrically to reduce the number of effective
cylinders. This operation is used to identify a
cylinder that does not output power normally
(combustion in it is abnormal).
1. Selecting menu
Select "Diagnostic Tests" on "Service Menu"
screen.
2. Selecting sub menu
After the "Diagnostic Tests" screen is displayed,
select "Cylinder Cutout Mode Operation" using
the function switch or numeral input switches.
a Selecting method is the same as on the
"Service Menu" screen.
(PC88MR-
PC88MR-10

Advertisement

Table of Contents
loading

Table of Contents