Komatsu PC88MR-10 Shop Manual page 32

00 Index and foreword
Foreword, safety and general information
Type 3
(ALL-C930-925-P-03-A)
Disconnection
1. While holding the fitting, push body (9) in straight
until sliding prevention ring (8) hits contact
surface (b) at the hexagonal portion on the male
side. (Fig. 10)
2. While keeping the condition of Step 1, push
cover (10) straight until it hits contact surface (b)
of the hexagonal portion on the male side. (Fig.
11)
3. While keeping the conditions of Steps 1 and 2,
pull out whole body (9) to disconnect it. (Fig. 12)
00-30
Connection
1. While holding the fitting, push body (9) in straight
until sliding prevention ring (8) hits contact
surface (a) at the hexagonal portion on the male
side to connect them. (Fig. 13)
PC88MR-10