Komatsu PC88MR-10 Shop Manual page 450

30 Testing and adjusting
Electrical system
Code
Monitoring item (Display on screen)
No.
20260 KOMTRAX Assembly P/N
20418 KOMTRAX S/N
20261 KOMTRAX Program P/N
20273 KOMTRAX ProgramVersion
20262 ID Key Controller Assembly P/N
20419 ID Key Controller S/N
20263 ID Key Controller Program P/N
a Listing order in table
The monitoring items are listed in the order of the display on the monitoring item selection menu screen.
a Unit
The display unit can be set to SI, Metric, or Imperial as required (select a desired unit from "Unit" of
"Default" in the service menu).
"mg/st" in the display unit is an abbreviation for milligram/stroke.
a Applicable component
ENG: The engine controller is in charge of detecting the monitoring information.
PUMP: The pump controller is in charge of detecting the monitoring information.
MON: The machine monitor detects monitoring information.
Note 1: Instantaneous fuel consumption (Code No.: 37300) is the theoretical fuel consumption ratio. (Since it
is a theoretical value, it is slightly different from the actual fuel consumption ratio.)
30-100
Unit (Default: SI)
Imperial
SI Metric
Applic-
able
Remarks
compo-
nent
Only when
MON KOMTRAX is
used
Only when
MON KOMTRAX is
used
Only when
MON KOMTRAX is
used
Only when
MON KOMTRAX is
used
Only when ID key
MON
is used
Only when ID key
MON
is used
Only when ID key
MON
is used
PC88MR-10