Table of Contents
Advertisement
Operator mode functions
The functions with which the operator can display or set by operating switches in normally displayed
screen.
Display and setting of some functions require special operation of the switch.
Items available in the operator mode are as follows:
Cate-
gory
(*1)
Display of KOMATSU logo
Display of password input
Display of service person identification state
Display of operator ID input screen
Display of Check before starting
Display of warning after check before starting
A
Display of maintenance due time over
Display to check working mode and travel speed
Display of standard screen
Display of engine shutdown secondary switch screen
Display of end screen
Selection of auto-deceleration
Selection of working mode
Selection of travel speed
Stop operation of alarm buzzer
Operation of windshield wiper
Operation of window washer
Operation of air conditioner
Operation to display camera mode
B
Operation to display clock and service meter
Check of maintenance information
Setting and display of user menu
ECO Guidance
Machine Setting
Maintenance
Monitor Setting
Display of message (including KOMTRAX messages for user)
Display of ECO guidance
Display of caution monitor
C
Display of action level and failure code
Checking function by LCD (Liquid Crystal Display)
D
Function to check service meter
Function of usage limitation setting/change password
*1: The operator mode items are classified as follows.
A: Display from the time when the starting switch is turned to "ON" position to the time when display changes
to the standard screen, and display after starting switch is turned to "OFF" position
B: Display when the machine monitor switch is operated
C: Display when condition is satisfied
D: Display that requires special operations of switches
*2: Display sequence from the time when the starting switch is turned to ON position to the time when the
standard screen appears varies depending on the settings and conditions of the machine as follows.
U: When the engine start lock and operator ID No. input setting are enabled.
V: When the engine start lock is enabled and the operator ID No. input setting is disabled.
W: When the engine start lock is disabled and the operator ID No. input setting is enabled.
PC88MR-10
(PC88MR-Q193-042-K-00-A)
Item
10 Structure and function
Machine monitor system
Display order (*2)
U
V
W
X
1
1
1
1
2
2
3
2
4
3
5
3
4
2
6
4
5
3
7
5
6
4
Y
Z
1
1
2
2
3
3
4
4
5
5
10-233
Advertisement
Chapters
Table of Contents
Troubleshooting
