Komatsu PC88MR-10 Shop Manual page 454

30 Testing and adjusting
Electrical system
2. Selecting maintenance record item
After the "Maintenance Record" screen is
displayed, select an item of which the setting is
to be checked by using the function switches or
numeral input switches.
[F1]: Moves to next page (screen)
[F2]: Moves to previous page (screen)
[F3]: Moves selection downward
[F4]: Moves selection upward
[F5]: Returns to "Service Menu" screen
a You may enter a 2-digit code by using the
numeral input switches to select the item of
that code.
a The following items can be selected in the
maintenance record.
"49 Air Cleaner Cleaning or Change"
"60 Coolant Change"
"41Fuel Prefilter Change"
"01 Engine Oil Change"
"02 Engine Oil Filter Change"
"05 Hyd Oil Tank Breather Change"
"03 Fuel Main Filter Change"
"04 Hydraulic Oil Filter Change"
"07 Damper Case Oil Check/Refilling"
"09 Swing Machinery Case Oil Change"
"08 Final Dribe Case Oil Change"
"47 KCCV Filter Change"
"10 Hydraulic Oil Change"
3. Items displayed on Maintenance Record screen
The following information is displayed.
30-104
(a): Maintenance items
(b): Number of replacements up to now
(c): Service meter reading (SMR) at the last
replacement
Maintenance mode setting
The actuating condition of the maintenance
reminder function in the operator mode can be set
and changed by using this menu.
To enable or disable the function
Change replacement interval setting (by item)
To initialize all of replacement interval setting
1. Selecting menu
Select "Maintenance Mode Setting" on "Service
Menu" screen.
2. Selecting sub menu
After the "Maintenance Mode Setting" screen is
displayed, select an item of which the setting is
to be changed by using the function switches or
numeral input switches.
[F1]: Moves to next page (screen)
[F2]: Moves to previous page (screen)
[F3]: Moves selection downward
[F4]: Moves selection upward
[F5]: Returns to "Service Menu" screen
[F6]: Enters selection
a When you input a 2-digit code by using the
numeral input switches, the corresponding
item is directly selected. Accordingly, you
may enter the selection by using [F6].
(PC88MR-Q1F1-100-K-00-A)
PC88MR-10