turck IO-LINK MASTER User Manual page 48

Parameterization
Table 13: Parameter name
Parameters of
the generic IO-
Link devices
A default Identification
settings
select device
D301171 - IO-Link master 1108
Value/ Meaning
00 = any device
The connected sensor has to be a PS- or TS-TURCK-
sensor and it's data width has to match the data width of
the configured sensor. In addition to that, the cylce time for
the cycle modes "fixed value" and "synchronous" has to be
≥ the devices minimum cycle time .
10 = same device type
The connected sensor has to be the same as the config-
ured one. Vendor- and device-ID have to match.
Please chose the correct TURCK device-type from the list.
3
3-23