Table of Contents
Advertisement
Technical features
IO-Link events
Figure 9:
Example for the
interpretation of
IO-Link events
Error codes acc. to PROFIBUS-DPV1
The following channel-specific error codes acc. to PROFIBUS-DP are generated by the IO-
Link master SDPX-IOL4-0001:
Value (dec.)
Table 10:
Error codes acc.
Error-Codes (1 to 9 acc. to Norm)
to DP
2
4
5
6
7
8
9
3-14
Note
The TURCK IO-Link master interprets IO-Link event-diagnostics sent by the device
and displays them as plaintext-diagnostic message in the PLC-software.
Diagnosis
undervoltage
overload
overtemperature
wire-break
upper limit value exceeded
lower limit value exceeded
error
Meaning in IO-Link
Undervoltage at the sensor
Overload at the output
– Port-configuration of the master
does not and connected IO-Link
device do not match
– Identification (manufacturer-,
device-ID) of the IO-Link device
failed
– no IO-Link device connected
D301171 - IO-Link master 1108
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the IO-LINK MASTER and is the answer not in the manual?