Related Manuals for turck TBEN-RFID Series
Summary of Contents for turck TBEN-RFID Series
- Page 1 Your Global Automation Partner TBEN-…RFID… Use HF Bus Mode Technical Support Document...
- Page 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 3: Table Of Contents
Content About these Instructions........................ 5 Target groups........................ 5 Explanation of symbols used .................. 5 Other documents ...................... 5 Naming convention ..................... 5 Feedback about these instructions................ 5 HF Bus Mode – Overview........................ 6 Compatible devices ..................... 7 Connecting Read/Write Heads for the HF Bus Mode.............. 8 HF Applications –... - Page 4 Content Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 5: About These Instructions
This symbol denotes actions that the user must carry out. RESULTS OF ACTION This symbol denotes relevant results of actions. Other documents Besides this document the following material can be found on the Internet at www.turck.com: Operating instructions Data sheet Configuration manual Naming convention Common synonyms for "data carriers"... -
Page 6: Hf Bus Mode - Overview
HF read/write heads from firmware version Vx.93. On the TBEN- S2-2RFID-4DXP module, continuous HF bus mode requires firmware version V3.6.1.0 or later. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 7: Compatible Devices
Compatible devices The following modules support HF bus mode: TBEN-S2-2RFID-4DXP TBEN-L4-4RFID-8DXP TBEN-L5-4RFID-8DXP TBEN-L4-4RFID-8DXP-CDS TBEN-L5-4RFID-8DXP-CDS TBEN-L5-4RFID-8DXP-CDS-WV V03.00 | 2019/10... -
Page 8: Connecting Read/Write Heads For The Hf Bus Mode
RFID connection cable (e.g. RK4.5T-0.3-RS4.5T/S2503) TBEN-S2-2RFID-4DXP VT2-FKM5-FKM5-FSM5 TN-M30-H1147/C53 TN-M18-H1147/C53 up to 32 per port TN-CK40-H1147/C53 Fig. 2: HF bus mode setup Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 9: Hf Applications - Setting Hf Bus Mode
Turck recommends making the bus address of the read/write head visible on the device. The following accessories are required to address the read/write heads in HF bus mode using the Turck Service Tool. Accessories are not supplied with the device and must be ordered sep- arately. STW-RS485-USB interface converter (Ident-No. 7030354) STW-RS485-USB-PS plug-in power supply unit (Ident-No. - Page 10 USB-interface RFID cable Power supply e.g. RK4.5T/S2500 STW-RS485-USB-PS Fig. 3: Connecting the read/write head to a PC via the interface converter Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
- Page 11 „ Open the Turck Service Tool. „ Click Actions or press [F4]. „ Click Set HF RFID reader bus address. Fig. 4: Selecting a function — Set HF RFID reader bus address The HF RFID Reader Setup Tool window opens. „...
- Page 12 Fig. 6: Changing the read/write head address „ Activate the required read/write heads in the parameter data via the appropriate XCVR bit. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 13: Operation
Operation Executing commands in HF bus mode „ Set the parameter data. „ Select the HF Bus Mode operating mode. „ Activate the connected read/write heads. „ Set the input data. „ Specify the command code. „ Set the start address for the command. „... - Page 14 Infineon SR- 0x00 0x37 read/write F55V02P Infineon SR- 0x00 0xF7 read/write F55V10P EM4233 0x00 0x33 read/write EM4233 SLIC 0x00 0x1F read/write Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 15: Replacing Bus-Capable Read/Write Heads
Replacing bus-capable read/write heads „ Remove the faulty read/write head. „ Connect the new read/write head with the default address 68 (delivered with …/C53). „ If multiple read/write heads are being replaced: Replace the read/write heads in the or- der in which they were connected. Addresses are allocated in ascending order to the read/write heads in the order in which the heads were connected. -
Page 16: Continuous Hf Bus Mode - Data Retrieval
Flashing (1 Hz) Read/write head not activated The yellow LED has no specific function in HF bus mode. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 17 Over 30 subsidiaries and over 60 representations worldwide! 100002946 | 2019/10 100002946 www.turck.com...
Need help?
Do you have a question about the TBEN-RFID Series and is the answer not in the manual?
Questions and answers