Subscribe to Our Youtube Channel
Related Manuals for turck BL67
Summary of Contents for turck BL67
- Page 1 How to Flash BL67/BL20 RFID Using a Universal Programming Dongle and Memtool 3 G1011 Revised 1/14/2014...
-
Page 2: Materials List
6) BL 67 cards your flashing BL67 Material Software List: • 1) Windows XP operating system • 2) Memtool 3 • 3) Most recent version of the 2RFID-A or 2RFID-S firmware file www.turck.com • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441... -
Page 3: Important Notes
Universal Dongle converter -> Hook the converter to the 3) Universal Dongle itself -> Leave the 4) Card Connector alone for the moment -> Hook the power leads up to the 5) Power Supply. www.turck.com • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441... - Page 4 If you are flashing a BL67 card, please skip to page six. If you’re flashing a BL20, please read on. LET’S FLASH A BL20 CARD. -> Remove the card from the casing -> Bring the card to your solder station and find pin 1 of the top right micro chip (Look at the pictures) www.turck.com...
- Page 5 -> Gently remove pin 1 using your soldering iron and scalpel -> This is what your chip should look like once pin 1 is removed www.turck.com • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441...
- Page 6 -> Make sure the switch is to the right -> Hit reset before you begin programming in Memtool 3 (You also must hit the reset switch before every card you program) www.turck.com • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441...
- Page 7 -> Open Memtool 3 -> Open file -> Choose your firmware file -> Open www.turck.com • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441...
- Page 8 -> Highlight the firmware file -> Connect -> Add Set -> Program www.turck.com • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441...
-
Page 9: Troubleshooting Solutions
8. If one card just won’t connect, try a different card. IMPORTANT NOTE: EVERY TIME YOU DO A TROUBLE SHOOTING SOLUTION YOU MUST COMPLETELY CLOSE OUT AND RESTART MEMTOOL. www.turck.com • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441...
Need help?
Do you have a question about the BL67 and is the answer not in the manual?
Questions and answers