Table of Contents
Advertisement
50
Commissioning
5. Select the target directory in which you want to save the new parameter file.
6. Click [Save] in the standard Windows dialog.
7. The parameter file is saved to the target directory that you selected.
7.1.1.3.2 "Start" Tab
Click the Start tab in the horizontal tab menu to display the following selection
options in the main menu.
Figure 17: Contents of the Horizontal Tab Start
If you select the Channel settings menu item in the vertical tab menu, you can
also choose the required I/O module channel in the main menu.
Figure 18: Start > Main Menu > Channel Selection List
The exact meaning of the individual selection options is described in the "Main
Menu" section.
7.1.1.3.3 "Connection" Tab
Click the Connection tab in the horizontal tab menu to display the following
selection options in the main menu.
If the is no connection to the I/O module, the following button appears:
Figure 19: Connection Tab for Disconnected I/O Module
Click the [Connect] button to establish a connection to the I/O module.
If there is a connection to the I/O module, the following button appears:
Manual
Version 1.2.2
WAGO-I/O-SYSTEM 750
750-496 8AI 0/4-20mA S.E.
Advertisement
Chapters
Table of Contents
