Save" Menu Item; 7.1.1.3.2 "Start" Tab; Figure 17: Contents Of The Horizontal Tab Start - WAGO 750-496 Manual

50 Commissioning
7.1.1.3.1.2

"Save" Menu Item

Calibration settings are not saved!
Please note that the calibration settings cannot be saved in the parameter file.
Note the memory range!
Please note that only the settings are saved in the parameter file that you have
already transferred to the I/O module by clicking the [Write
buttons in the main menu.
In this menu item you can save the changes you have made in a parameter file.
Proceed as follows:
1. Click the [File] button in the horizontal tab menu.
2. The application menu opens.
3. Click the [Save] button in the application menu.
4. A standard Windows dialog appears to select the target directory.
5. Select the target directory in which you want to save the new parameter file.
6. Click [Save] in the standard Windows dialog.
7. The parameter file is saved to the target directory that you selected.

7.1.1.3.2 "Start" Tab

Click the Start tab in the horizontal tab menu to display the following selection
options in the main menu.

Figure 17: Contents of the Horizontal Tab Start

If you select the Channel settings menu item in the vertical tab menu, you can
also choose the required I/O module channel in the main menu.
WAGO-I/O-SYSTEM 750
750-496 8AI 0/4-20mA S.E.
]
or [Write all]
Manual
Version 1.2.0