Save" Menu Item; 7.1.1.3.2 "Start" Tab; Figure 18: Contents Of The Horizontal Tab Start; Figure 19: Start > Main Menu > Channel Selection List - WAGO I/O-SYSTEM 750 Manual

45 Commissioning
7.1.1.3.1.2

"Save" Menu Item

The calibration settings are not saved!
Please note that the calibration settings cannot be saved in the parameter file.
Note the memory range!
Please note that only the settings are saved in the parameter file that you have
already transferred to the I/O module by clicking the [Write
buttons in the main menu.
In this menu item you can save the changes you have made in a parameter file.
Proceed as follows:
1. Click the [Save] button in the main menu.
A Windows standard dialog window for selecting the target directory then
opens.
2. Select the target directory in which you want to save the new parameter file.
3. Click [Save] in the Windows standard dialog window.
The parameter file is saved to the target directory selected.

7.1.1.3.2 "Start" Tab

Click the Start tab in the horizontal tab menu to display the following selection
options in the main menu.

Figure 18: Contents of the Horizontal Tab Start

If you select the Channel settings menu item in the vertical tab menu, you can
also choose the required I/O module channel in the main menu.
Figure 19: Start > Main Menu > Channel Selection List
Manual
Version 1.0.0
WAGO-I/O-SYSTEM 750
750-597 8AO 0-10V/±10V DC
]
or [Write all]