Quick Start; Node Assembly - WAGO I/O-SYSTEM 750 510 376 07 Quick Start Manual

2 Quick Start

2.1 Node Assembly

Build up the fieldbus node as follows (from left to right):
750-841; 750-400 ; 750-501 ; 750-600.
Connect the supplies for the controller and for the power jumper contacts to
the DC 24 V power supply unit 787-602 (see Fig.1).
In this example it would be sufficient to bridge "24V" and "+" or "0V" and "-
".
Fig.1: 10/100 MBit ETHERNET fieldbus controller 750-841
WAGO-I/O-SYSTEM 750
ETHERNET StarterKit 2
Quick Start • 7
Node Assembly