Table of Contents
Advertisement
4.9.5.b. IPv6 Ping Execution
On the Ping Execution Menu, pressing "6" opens the IPv6 Ping Execution
screen, as shown in Fig. 4-9-10. On this screen, you can execute the IPv6 ping
command from the Switching Hub to confirm communications with
connected terminals and other devices.
PN28160i Local Management System
Ping Execution -> IPv6 Ping Execution
Target IP Address:
Number of Requests:
Timeout Value:
=============== Result ===============
-------------------------------- <COMMAND> -----------------------------------
Set Target [I]Pv6 Address
Set [N]umber of Requests
Set [T]imeout Value
Command>
Enter the character in square brackets to select option
Screen Description
Target IP Address:
Shows the IPv6 address of the target of the ping. The factory
default setting is ::.
Number of
Shows the number of times of ping. The factory default setting is 10
Request
times.
Timeout Value
Shows the time before timeout occurs. The factory default setting is
3 seconds.
Result
Shows the ping result.
::
10
3 Sec.
[E]xecute Ping
[S]top Ping
[Q]uit to previous menu
Fig. 4-9-10 Ping Execution
246
Advertisement
Table of Contents
