Table of Contents
Advertisement
Available commands are listed below.
N
Set a port group name.
Press "N." The command prompt changes to "Enter Port Group name>." Enter a port
group name in 16 one-byte characters or less.
P
Set a port group member.
Press "P." The command prompt changes to "Enter egress port number>." Enter a port
number you wish to set.
When entering multiple port numbers, delimit with comma with no space, or
hyphenate the continuous numbers.
A
Apply modified setting of the port group.
Press "A" to apply the setting.
Q
Return to the previous menu.
222
Advertisement
Table of Contents
