Page 1
Switch-S24GPWR Installation Guide PN25249-TH Model No. PN25249-MY PN25249-ID PN25249-SG Thank you for purchasing our product. This document provides important information about safe and proper operations of this Switching Hub. Please read the "Important Safety Instructions" on pages from 3 to 5.
Contents Important Safety Instructions Basic Instructions for the Use of This Product 1 Product Outline 1.1 Features 1.2 Specifications 1.3 Accessories 1.4 Basic operation 2 Part Names and Functions 2.1 LED display change 2.2 PoE power supply function 3 Installation and Configuration 3.1 Mounting to rack 3.2 Configuration of IP address (Basic) Troubleshooting...
Important Safety Instructions This chapter contains important safety instructions for preventing bodily injury and/or property damage. You are required to follow them. Severity of bodily injury and/or property damage, which could result from incorrect use of the Switching Hub, are explained below. WARNING This symbol indicates a potential hazard that could result in serious injury or death.
Page 4
WARNING Do not put the Switching Hub into fire. Deviation could lead to explosion and/or fire. Do not insert nor drop any foreign objects such as metal or readily combustible things into the inside through the openings, twisted pair ports, or console ports. Deviation could lead to fire, electrical shock, and/or equipment failure.
Page 5
CAUTION This Switching Hub is to be periodically serviced in order to maintain its performance. Please choose a product administrator, and have them be sure to implement periodic maintenance. When doing maintenance, check the inspection chart that is posted on our website which has the requisite items listed on it. When using this Switching Hub to design systems, use it after applying ...
When stacking Switching Hubs, leave a minimum of 20 mm space between them. 1. Please note that Panasonic shall not bear any liability whatsoever for any damages (this shall include lost earnings, lost opportunities, etc. but this is not restricted to these...
Product Outline Switch-S24GPWR is an Ethernet Switching Hub with management function having 24 ports of 10/100/1000BASE-T. Ports 1 to 24 support IEEE802.3af PoE power supply function. 1.1 Features Ports 1 to 24 are 10/100/1000BASE-T ports corresponding to auto negotiation.
1.3 Accessories Please be sure to confirm the content. Please contact our distributor if any of the contents are insufficient. Quantity Installation Guide (this document) CD-ROM (PDF version of Operating Instructions) Rubber foot Mount brackets (for mounting on a 19-inch rack) ...
Part Names and Functions MAC Address label Power cord hook block Power port Front panel Ground terminal Serial number label screw 10/100/1000BASE-T port Back panel Magnified view on the next page Console port Power port Connect the supplied power cord to this port and connect the other end into an electric outlet.
Page 11
Collision LED Power LED PoE limit LED Status/ECO mode LED Power supply mode LED GIGA mode LED Speed modeLED DUPLEX mode LED Loop History mode LED LED DISPLAY CHANGE BUTTON POWER LED (Power) Green Light : Power is ON. : Power is OFF.
Page 12
Part Names and Functions Table 1. Port LED of 1–24 indicates each mode in the following way Port LED Display mode Behavior Description Green Light Link is established. STATUS/ECO Green Blink Transmitting and receiving data. No device connected. Green Light Supplying power normally (ports 1 to 24 only).
2.1 LED display change How to switch the display using the LED DISPLAY CHANGE BUTTON LED DISPLAY CHANGE BUTTON Using "LED DISPLAY CHANGE BUTTON" on the front panel, you can switch the following operations: indication of a connection status with a connected terminal (Status mode), indication of PoE power supply (PoE mode), indication of communication speed at 1000 Mbps (GIGA mode), indication of communication speed at 100 Mbps or 10 Mbps (Speed mode), indication of transmission mode of...
Page 14
Part Names and Functions Switch two types of Base modes and their LEDs in the following way: When Base mode is Status mode (factory default setting) Press "LED DISPLAY CHANGE BUTTON" manually. Automatic Boot Automatically returns to Base mode after 1 minute. Status mode DUPLEX Loop History...
2.2 PoE power supply function PoE power supply function operation overview Ports 1 to 24 support IEEE802.3af PoE. This function allows for power supply of up to 15.4 W through each port and 124 W in total through the Switching Hub. PoE LIM.
Installation and Configuration 3.1 Mounting to rack Take out the supplied 2 mounting brackets (for 19-inch rack) and 8 screws (for fixing the main unit and the mounting bracket), and fix the brackets to the main unit by tightening screws into 4 holes located at the sides.
Page 17
Screen 1 Screen 2 Screen 3 Screen 4 Screen 5 * For the following, please see the PDF version Operating Instructions in CD-ROM. - Detailed configuration and management methods using the CLI. - Configuration and management method from ZEQUO assist Plus.
Troubleshooting If you find any problem, please take the following steps to check. LED The POWER LED (Power) is not lit. Check if the power cord is disconnected. Please confirm that the power cord is securely connected to the power port. ...
Page 19
Communications fail. Is the link-up correct? When the Power Saving Mode (power saving mode of the MNO series) or EEE (IEEE 802.3az Energy Efficient Ethernet function) is enabled, some connected terminals may not be correctly linked. Change the setting as follows. 1.