Ping Execution - Panasonic GA-AS12TPoE+ Series Instruction Manual

5.3.7.

Ping Execution

Select "System Tools" and then "Ping Execution" to open the screen shown in Fig-
ure 5-35. On this screen, you can send a ping.
Screen Description
Target IP Address
Number of Request Displays the number of times a ping is being sent. The factory default setting
Timeout Value
Result
Figure 5-35 Ping Execution
Displays the IPv4 address of the target of the ping. The factory default setting
is blank.
is 10 times.
Displays the timeout time. The factory default setting is 3 seconds.
Displays the ping execution result.
69