Table of Contents
Advertisement
Available commands are listed below.
N
Display the values of the next port.
Press "N" to display the next page.
V
Display the values of the previous port.
Press "V" to display the previous page.
T
Change the age-out time.
Press "T." The command prompt changes to "Enter new age-out time>." Enter
an integer number between 0 and 65535 (seconds).
M Change to display in the order of MAC address.
P
Change to narrow down by port number.
Press "P." The command prompt changes to "Enter port number>." Enter the
target port number.
A
Add or delete a MAC address to/from the table.
Press "A." The command prompt changes to "Add or Delete MAC address
(A/D)>." Press "A" to add a MAC address. Then, the command prompt changes
to "Enter MAC Address(xx:xx:xx:xx:xx:xx)>." Enter a MAC address to be added.
Then, the command prompt changes to "Enter port number>." Enter the
IEEE802.1X MAC-based access control port number.
To delete a MAC address, press "D" and enter a MAC address to be deleted.
Q
Return to the parent menu.
197
Advertisement
Table of Contents
