Table of Contents
Advertisement
Available commands are listed below.
I
Set an in-profile index number.
Press "I." The command prompt changes to "Enter in-profile action index>."
Enter an index number with a value of 1 to 65535.
D
Deny/permit packets.
Press "D." The command prompt changes to "Select Deny/Permit (1-2)>." Press
"1" to deny packets. Press "2" to permit them.
S
Set a DSCP value to be marked.
Press "S." The command prompt changes to "Enter DSCP value>." Enter a DSCP
value of 0 to 63.
P
Set a precedence value to be marked.
Press "P." The command prompt changes to "Enter ToS precedence value>."
Enter a precedence value of 0 to 7.
C
Set a CoS value to be marked.
Press "C." The command prompt changes to "Enter CoS value>." Enter a CoS
value of 0 to 7.
A
Apply the setting. If not applied here, the setting will be discarded.
Q
Return to the previous menu.
143
Advertisement
Table of Contents
