10. Ping Execution
Ping can be used to verify communications.
Ping command
All modes
Ping (number of echo requests) command
All modes
Ping (timeout) command
All modes
M8eGLPWR+> ping 192.168.1.1
Type Ctrl-C to abort.
Reply Received From :
Reply Received From :
Reply Received From :
--- 192.168.1.1 Ping Statistics ---
3 Packets Transmitted, 3 Packets Received, 0% Packets Loss
M8eGLPWR+> enable
M8eGLPWR+# ping 192.168.1.1
Type Ctrl-C to abort.
Reply Received From :
Reply Received From :
Reply Received From :
--- 192.168.1.1 Ping Statistics ---
3 Packets Transmitted, 3 Packets Received, 0% Packets Loss
M8eGLPWR+# configure
M8eGLPWR+(config)# ping 192.168.1.1
Type Ctrl-C to abort.
Reply Received From :
Reply Received From :
Reply Received From :
--- 192.168.1.1 Ping Statistics ---
3 Packets Transmitted, 3 Packets Received, 0% Packets Loss
ping <ip-address>
ping <ip-address> [-n <count>]
ping <ip-address> [-w <timeout(sec)>]
192.168.1.1, TimeTaken : 8 ms
192.168.1.1, TimeTaken : 9 ms
192.168.1.1, TimeTaken : 7 ms
192.168.1.1, TimeTaken : 10 ms
192.168.1.1, TimeTaken : 7 ms
192.168.1.1, TimeTaken : 7 ms
192.168.1.1, TimeTaken : 10 ms
192.168.1.1, TimeTaken : 9 ms
192.168.1.1, TimeTaken : 6 ms
Fig. 10-1 Ping execution
(ping 192.168.1.1)
66