Panasonic Switch-M16eGi Operation Manual page 184

Screen Description
NAS ID Displays the authentication ID (NAS Identifier).
Port No Displays the port number.
Number of Displays the number of supplicants that can be authenticated.
Supplicant
Operational Displays the packet control status when the terminal is not
Control Direction authorized.
(Reflects the settings by Administrative Control Direction below.)
Both
In
Administrative Displays the packet control method when the terminal is not
Control Direction authorized.
Both
In
Transmit Period The number of seconds to wait before requesting the supplicant to
reattempt authentication.
The factory default setting is 30 seconds.
Max Request The maximum number of times of retransmitting an authentication
request. The factory default setting is 2.
Supplicant Displays the timeout for the client.
Timeout The factory default setting is 30 seconds.
Quiet Period The number of seconds to wait before reattempting a failed
authentication.
The factory default setting is 60 seconds.
Serv Timeout Displays the timeout for the authentication server.
The factory default setting is 30 seconds.
Re-auth Period Displays the re-authentication time interval. The factory default
setting is 3600 seconds.
Force Auth MAC Displays the re-authentication interval of the force authorized MAC
Timeout address.
The factory default setting is 3600 seconds.
Re-auth Timer Displays the reference for the re-authentication time interval.
Mode The factory default setting is RADIUS.
RADIUS
Local
Re-auth Timer Displays the reference for the re-authentication time interval.
Mode The factory default setting is RADIUS.
RADIUS
Local
Supplicant MAC Displays the MAC address of the supplicant.
Addr
Type Displays the authentication type.
Dynamic
Without authentication, this switch does not
transmit/receive packets from the applicable port.
Without authentication, this switch does not receive
packets from the applicable port.
Without authentication, this switch does not
transmit/receive packets from the applicable port.
Without authentication, this switch does not receive
packets from the applicable port.
Preferably uses the value reported from the RADIUS
server.
Uses the Re-auth Period value.
Preferably uses the value reported from the RADIUS
server.
Uses the Re-auth Period value.
Indicates that the terminal was dynamically
authorized by the RADIUS server.
184